Lifting load: handling weight is 50kg in horizontal state;

Safety factor of equipment: 1:1.5 (comply with European CE related safety regulations on lifting equipment, and safety regulations in the UVV18 and VBG 9a of the Accident Prevention Regulations);

Lifting height:  1700mm;

Handling speed: initially depending on the proficiency of the operator, after one week of operation, the operation speed can reach 5-8 times per minute;

Noise index: not higher than 75 db (measured without sound insulation cover);

Power off protection: when power off in the plant, the less rotary joint above the pipe (internal check valve) will work, disconnect the outside air to guarantee a period of vacuum pressure, products will slowly land from the air to the ground, remove the workpiece again;

Control mode: manual operation. The lifting is done by the trachea, horizontal movement requires manual labor-saving pulling, the force ratio is 1:100, 100kg of a product can be moved with only 1kg of force.

Main material:      carbon steel    sprayed aluminum alloy   stainless steel 304

Suction pan material:    stainless steel 304

Lifting pipe:  imported

Operating handle:  stainless steel 304

High performance vacuum blower:   JR330

Elevator large load:     50kg,

Handling height:      1700mm

Total height:          3500mm

Effective area:         2800mm * 270° fan working area

Power supply:         3p 380v 50hz

Total power:          3.3kw